SiliCLEAN ANTI-TRACKING FILMS
'No-Mark' SiliCLEAN Anti-Tracking films are used to prevent
ink marking and tracking from press transfer cylinders. They
effectively replace loose net type materials, last longer, and are
much easier to install.
Two SiliCLEAN Surface Choices:is available in two surface types; Standard
and Diamond. The Standard has a typical press life of six months. Our
Diamond surface usually exceeds that by a factor of 4x.
|
|
|
Three Choices of Backing:
1. Film Only (Type SFO).
Build-up: 5.5 mil
No backing. Application determined by the installer. Normally
accomplished with tapes, spray adhesive, or with clamps on some press
models.
|
Type SFO, Film Only
|
2. Film + Repositionable Adhesive.
(Type SRA) Build-up: 8.0 mil
Special repositionable adhesive allows very fast and easy
installation on transfer cylinders and Super BlueŽ or Heidelberg net
jackets. Simply pull-up and reposition if it skews during install.
Zero adhesive clean-up during change-over provides the added bonus of
more productive press time. Our most popular SiliCLEAN! |
Type SRA, Film + Repositionable Adhesive
|
3. Film + VELCRO Loop (Type SWV).
Build-up: 8.5 mil
A 'sandwich' assembly with a backing of proprietary VELCROŽ loop.
Type SWV is semi-rigid, enabling it to form a smooth drum when used in
conjunction with 'No-Mark' full cylinder anti-tracking
system. |
Type SWV, Film + VELCROŽ Loop
|
|
|
Long On-Press Life. 4
Fewer Changeovers.
I want pricing for my press! 